Irrigation
Field and orchard irrigation where the pump runs through the day and the water is stored or used as it is pumped.
Solar pump inverters
220V Solar Pump Inverters
For single-phase and three-phase pump motors on a 220 V, 230 V or 240 V supply, driven from a PV array with the grid available alongside it.
0.75–7.5kW | For 220/230/240V AC Pumps
01 / Quick selection
Narrow the list to the pump you have
Every model whose pump voltage is 220 V, 230 V or 240 V is listed here.
Have the pump nameplate? Match the series from its figures
| Model | Rated power | Pump voltage | Pump phase | Recommended PV voltage | Hybrid AC input | Built-in booster | Details |
|---|---|---|---|---|---|---|---|
| 220V Solar Pump Inverter HSPH 220V | 0.75–30 kW | 220V, 230V | Single Phase, Three Phase | Yes | View details | ||
| 380/400/440V Solar Pump Inverter HSPH High-voltage | 0.75–200 kW | 380V, 400V, 440V | Three Phase | Yes | View details | ||
| High Power Cabinet Solar Pump Inverter HSPH Cabinet | 45–200 kW | 380V, 400V, 440V | Three Phase | Yes | View details |
A cell left empty is a value the record does not state yet. Send the pump nameplate and we will confirm it for your pump.
02 / Key features
What every model in this collection is chosen on
- Every model states its pump voltage, pump phase and rated power, so the list narrows to the pump you already have.
- The PV input window is given as a minimum, a maximum and the MPPT range, so the array is sized to the inverter rather than guessed.
- Hybrid AC input is stated per model, for sites that keep a grid or a generator alongside the array.
- Functions such as dry-run protection, water level control and remote monitoring appear only where the record states them.
03 / Typical applications
Where this collection is asked for
Livestock and village supply
A daily water demand served from a well, a borehole or a tank, with storage sized around the pumping window.
Pressure boosting and networks
Pumping into a pressurised line or a distribution network where the pump is asked for a constant pressure.
Commercial and project pumping
Larger duties where the inverter is matched to a pump chosen for the duty, and the supply may be three-phase.
04 / System matching and PV sizing
The inverter follows the pump, and the array follows the inverter
The inverter is chosen from the pump, not the other way round. Send the pump nameplate and we will match it against the models listed on this page.
- Pump voltage, pump phase and rated power decide which collection and which model applies.
- The array is then sized to the inverter's PV window, so the pumping hours follow the site rather than the catalogue.
- Where the array cannot reach the pump voltage directly, the built-in booster collection is the one to read.
The array, the inverter, the pump: the whole path is checked before a model is proposed
05 / Technical support
What to send so the answer is about your installation
Sizing, matching and after-sales questions are answered by the same team that supplies the inverter.
- A photograph of the pump nameplate, with the voltage, phase and power visible.
- The water source, the required flow and the total head, if the pump is not yet chosen.
- The array you have or plan, and whether a grid or generator stays available.
A nameplate photograph is usually enough to start
06 / Questions
Questions this collection answers
Which collection does my pump belong to?
It follows the pump supply: 220 V, 230 V or 240 V pumps read the 220 V collection, and three-phase pumps on 380 V, 400 V or 440 V read the 380–440 V collection.
Can one model appear under two collections?
Yes. A model that states a built-in booster and a 380–440 V pump supply is listed in both, because it is one product with two attributes rather than two products.
What if no model matches the pump I have?
Send the nameplate. A pump outside the listed ranges is answered with the closest model we can supply and the difference stated, never with a model that does not fit.
Solar pump inverters
Not sure which model fits?
Send the pump nameplate and the site details. We will come back with the model, the array it needs and the supply it expects.