Solar water pumping · Built for your business

sales@hobertek.com

Project cases

Installations in the field.
Photographed as they are.

Solar pumping installations photographed on site: arrays and their mounting, pump rooms, control enclosures and water storage. What each site needs is settled by the water source and the duty, not by the photograph.

Solar pumping installation in the field

Water storage and array at a field site

01 / Field installations

Four things you see on site.
Nothing you can size from a photograph.

Every installation below is a working site. The photographs show the array, the route and the equipment enclosure; they do not show the duty the pump has to meet.

Arrays

Arrays and their mounting

Ground-mounted arrays on frames, set where the site allows.

Water storage

Storage and the water leaving it

Where the water is held at the point of use, the pipework that reaches it, and the water leaving the system.

Pump rooms and controls

Where the equipment is housed

The pump, the inverter and the controls, housed and protected on site.

Remote and livestock sites

Sites that run without a grid connection

Water supply where there is no grid to fall back on, including livestock watering.

Inverter wiring detail at a field installation

What a photograph shows, and what it does not.

02 / Reading a field photograph

The array is visible.
The duty is not.

A photograph shows the equipment and the way it is installed. It cannot show the water level, the flow the site needs or the duty the pump has to meet.

  • Visible: the array, its mounting, the route of the pipework, the enclosure and the storage.
  • Not visible: the water level, the duty the pump has to meet and the flow the site needs.
  • The pump, the inverter and the array are selected against your site, not against a photograph.
  • Send the site details and the answer comes back as a configuration, with the components that complete it.

03 / Questions we are asked

Case questions.
Direct answers.

Where are these installations?

They are solar pumping installations photographed in the field. The photographs are published without customer names or site details.

Can I tell which pump or inverter is installed from a photograph?

No. The pump model, the inverter and the array size are not visible in a photograph, and they are not claimed here. They are settled by the site and the duty the pump has to meet.

Can an installation like this be supplied?

The equipment is selected against your water source and the duty, not against a photograph. Send the site details and the answer comes back as a configuration.

Next step

Your site.
Its own configuration.

Share the water source, the duty and what is already installed. Our sales team replies with the configuration that fits and the next step for supply.