sales@hobertek.com
Get a Quote

Project cases

Installations in the field.
Photographed as they are.

Solar pumping installations photographed on site — arrays and their mounting, pump rooms, control enclosures and water storage — and the installation records whose project files state the equipment that was configured. What each site needs is settled by the water source and the duty, not by the photograph.

Send your site details See the product range
Solar pumping installation in the field

Water storage and array at a field site

01 / Installation gallery

Four things you see on site.
Nothing you can size from a photograph.

Every installation shown is a working site. The photographs show the array, the route and the equipment enclosure; they do not show the duty the pump has to meet.

Arrays

Arrays and their mounting

Ground-mounted arrays on frames, set where the site allows.

Ground-mounted solar array on a mounting frame
Ground-mounted array on a frame.
Solar array mounting support structure
Array mounting on a support structure.
Solar array at a field pumping site
Array at a field site.
Solar array at a dry field site
Array at a dry site.
Solar array beside a shelter at a field site
Array beside a shelter.
Solar array on open land
Array on open land.

Water storage

Storage and the water leaving it

Where the water is held at the point of use, the pipework that reaches it, and the water leaving the system.

Water storage tanks beside a solar array
Storage tanks beside an array.
Solar pumping installation with water storage
Storage and array in one view.
Water pipework at a reservoir
Pipework at a reservoir.
Water tank at a solar pumping site
Water tank at a pumping site.
Water discharged into a pond from a solar pump
Water discharged into a pond.
Water discharged from a solar pumping system
Water leaving the system.

Pump rooms and controls

Where the equipment is housed

The pump, the inverter and the controls, housed and protected on site.

Pump room installation at a solar pumping site
Pump room installation.
Control cabinet detail at a field installation
Control cabinet, field detail.
Solar pump inverter display in service
Inverter display in service.
Solar pump inverter and control box at a field installation
Inverter and control box.
Solar pump inverter enclosure installed on site
Inverter enclosure on site.
Controls sheltered under a solar array
Controls sheltered under the array.

Remote and livestock sites

Sites that run without a grid connection

Water supply where there is no grid to fall back on, including livestock watering.

Remote solar water pumping installation
Remote solar pumping site.
Livestock water supply from a solar pump
Livestock water supply.
Solar array under a canopy at a field installation
Array under a canopy in the field.
Solar array serving an irrigation site
Array serving an irrigation site.
Solar array beside a cultivated field
Array beside a cultivated field.
Controller mounted on a tank support
Controls mounted at the tank.

02 / Installation records

What the project files record.
And what they do not.

Three installations whose project files state the equipment that was configured. The country is the one each file is filed under, and the use each site serves is not recorded.

Solar array photographed at the installation
The array at the installation.

Installation record

Philippines · Surface pump system

A surface pump recorded at 380 V and 11 kW

Application
A surface pump solar system. The use it serves — irrigation, supply or transfer — is not recorded.
Pump in the record
Surface pump, 380 V, 11 kW. The pump power the file states, not a measured draw.
Inverter in the record
HSPH15KH, 15 kW.
Array in the record
315 W modules, 14 strings × 4 parallel.
Scope of supply
The file lists the equipment that was configured. It does not state which of it HOBER supplied, so no scope of supply is claimed here.

Not recorded

  • The problem the site had before the installation is not recorded.
  • Rated flow and total dynamic head are not documented, so no duty point is stated.
  • No measured operating result, running hours or energy record accompanies the file.
  • Solar array and its mounting frame photographed at the installation The array along its mounting frame.
  • Installation photographed from ground level The installation from ground level.

Archive photographs. Their grouping does not establish a capture date, a single site or an operating result.

Send a surface pump project

Solar array photographed at the installation
The array at the installation.

Installation record

Mexico · AC pump system

An AC pump recorded at 380 V and 5.5 kW

Application
An AC pump solar system. The use it serves is not recorded.
Pump in the record
AC pump, 380 V, 5.5 kW. The pump power the file states, not a measured draw.
Inverter in the record
HSPH7500H, 7.5 kW.
Array in the record
265 W modules, 15 strings × 2 parallel.
Scope of supply
The file lists the equipment that was configured. It does not state which of it HOBER supplied, so no scope of supply is claimed here.

Not recorded

  • The problem the site had before the installation is not recorded.
  • Rated flow and total dynamic head are not documented, so no duty point is stated.
  • No measured operating result, running hours or energy record accompanies the file.

Archive photographs. Their grouping does not establish a capture date, a single site or an operating result.

Send your AC pump project details

Solar array photographed on open ground at the installation
The array on open ground.

Installation record

Sudan · AC pump system

An AC pump recorded at 380 V and 7.5 kW

Application
An AC pump solar system. The use it serves is not recorded.
Pump in the record
AC pump, 380 V, 7.5 kW. The pump power the file states, not a measured draw.
Inverter in the record
HSPH7500H, 7.5 kW.
Array in the record
270 W modules, 21 strings × 2 parallel.
Output figure in the record
The file writes 35 m³/h. It does not say whether that is a design figure or a measurement, it gives no conditions for it, and no operating record accompanies it — so it is given as what the file says, and not as a result.
Scope of supply
The file lists the equipment that was configured. It does not state which of it HOBER supplied, so no scope of supply is claimed here.

Not recorded

  • The problem the site had before the installation is not recorded.
  • Rated flow and total dynamic head are not documented, so no duty point is stated.
  • No measured operating result, running hours or energy record accompanies the file.
  • Solar array and its mounting photographed at the installation The array and its mounting.
  • Installation photographed on site The installation on site.

Archive photographs. Their grouping does not establish a capture date, a single site or an operating result.

Send your target flow and total dynamic head

A record is what the file supports, and nothing is written up as a result: none of the three files states the problem the site had, the scope of supply, or an operating result with the date and the conditions it was taken under.

Inverter wiring detail at a field installation

What a photograph shows, and what it does not.

03 / Reading a field photograph

The array is visible.
The duty is not.

A photograph shows the equipment and the way it is installed. It cannot show the water level, the flow the site needs or the duty the pump has to meet.

  • Visible: the array, its mounting, the route of the pipework, the enclosure and the storage.
  • Not visible: the water level, the duty the pump has to meet and the flow the site needs.
  • The pump, the inverter and the array are selected against your site, not against a photograph.
  • Send the site details and the answer comes back as a configuration, with the components that complete it.
Send your site details

04 / Questions we are asked

Case questions.
Direct answers.

Where are these installations?

The photographs are taken in the field, and no customer name or site detail is given with them. The three installation records name the country each file is filed under, because that is what the file says; no address, no customer and no site coordinates are given.

Why is an installation called a record rather than a case?

Because a case states what the installation did. These three files state the equipment that was configured, and nothing about the problem the site had, the scope of supply, or the way the system has run since — which is why they are given as records rather than as cases.

Can I tell which pump or inverter is installed from a photograph?

No. The pump model, the inverter and the array size are not visible in a photograph, and nothing is claimed about them from one. They are settled by the site and the duty the pump has to meet.

Can an installation like this be supplied?

The equipment is selected against your water source and the duty, not against a photograph. Send the site details and the answer comes back as a configuration.

Next step

Your site.
Its own configuration.

Share the water source, the duty and what is already installed. Our sales team replies with the configuration that fits and the next step for supply.

Discuss your installation See the product range
Quick Pump Selection Select Pump Select by flow & head WhatsApp Talk to HOBER