sales@hobertek.com

Product Selector

Tell us what you have.
We match the series.

Match an inverter to the pump on site, or a pump and its inverter together.

HOBER solar pump and inverter package

Matched to the water source and the duty

Step 1 of 4

Solar pumping selection for trade and projects

Equipment supply and selection support from HOBER for distributors, installers, EPCs and project contractors.

Browse all pump models Search by model Distributor range planning

Pump model library

Search the full library by model or keyword

Every published HOBER pump model, with the data status of its own record. Only a model whose record carries its Q-H curve can enter the duty-point selection; every other model stays in the library for review.

896 pump models published · 467 carry curve data the duty selection reads · 429 held for technical review · 24 series · read from the product records, updated October 27, 2026

Counted from the published product records on this site. A model counted under curve data carries its own recorded Q-H points and is verified; a model under technical review is published here with its record’s own figures and cannot be ranked against a duty point.

Step 2 of 4 — Solar pumping inverter

Enter requirements & find your model

0.37 kW
0.55 kW
0.75 kW
1.1 kW
1.5 kW
2.2 kW
3 kW
4 kW
5.5 kW
7.5 kW
11 kW
15 kW
18.5 kW
22 kW
30 kW
37 kW
45 kW
55 kW
75 kW
90 kW
110 kW
132 kW
160 kW
185 kW
200 kW
220 kW
250 kW
280 kW
315 kW
400 kW
450 kW
500 kW
0.5 hp
0.75 hp
1 hp
1.5 hp
2 hp
3 hp
4 hp
5.5 hp
7.5 hp
10 hp
12.5 hp
15 hp
17.5 hp
20 hp
25 hp
30 hp
40 hp
50 hp
60 hp
75 hp
85 hp
100 hp
Other nameplate value…

No standard figure matches. Use Other nameplate value… and the figure your nameplate states.

As the nameplate states it: pick the standard figure, or write the one your nameplate carries.

More about the pump (optional)

As the nameplate states it. Where a model is rated for another frequency, its own rating is shown beside the frequency you chose.

A model number, or anything else printed on the nameplate, travels with your inquiry.

A reference, not a promise: the model, the PV side and the array are confirmed against your installation.

Step 2 of 4 — New solar pump set

Enter requirements & find your model

0.5–2000 m³/h

The water the site needs at the point of use, in the unit you measured it in. Move the control to your figure.

2–657 m

Metres: the lift from the working water level to the discharge point, plus the losses through the pipe run and fittings. Move the control to your figure.

Not sure about your total head? Calculate Total Head

Work the total head out from the parts you have measured

Optional. The total head is the lift from the working water level to the discharge point, plus the losses through the pipe run and fittings. Enter the parts you know and their sum becomes the total head: only the figures you enter are added, no pipe loss is estimated for you, so enter only the loss you have already counted. One bar of outlet pressure is read as 10.197 m of water head.

More about the site (optional)
100–210 mm

The borehole the pump goes into. A family whose pump does not fit the hole you enter is not proposed.

The frequency the pump runs on. It travels with your inquiry, and the rated frequency is confirmed on the nameplate before anything is quoted.

Already know the motor rating or its supply?

Optional. The supply you choose here is also the supply the inverter models are matched on; enter the rating as well and the inverter series is matched with it. Leave both empty and the pump models are still ranked from your duty point, and our engineer matches the inverter with your inquiry.

0.37 kW
0.55 kW
0.75 kW
1.1 kW
1.5 kW
2.2 kW
3 kW
4 kW
5.5 kW
7.5 kW
11 kW
15 kW
18.5 kW
22 kW
30 kW
37 kW
45 kW
55 kW
75 kW
90 kW
110 kW
132 kW
160 kW
185 kW
200 kW
220 kW
250 kW
280 kW
315 kW
400 kW
450 kW
500 kW
0.5 hp
0.75 hp
1 hp
1.5 hp
2 hp
3 hp
4 hp
5.5 hp
7.5 hp
10 hp
12.5 hp
15 hp
17.5 hp
20 hp
25 hp
30 hp
40 hp
50 hp
60 hp
75 hp
85 hp
100 hp
Other nameplate value…

No standard figure matches. Use Other nameplate value… and the figure your nameplate states.

A reference, not a promise: the series is a family, and the model, its power and the array are confirmed with you.

Step 3 — Recommended model and technical details

Step 3 — Recommended model and technical details

Quick Pump Selection Select Pump Select by flow & head WhatsApp Talk to HOBER