After-sales
Pump Help
Tell us what the pump is doing. The check asks one question at a time and ends with the next step for your situation.
01 / Start from what you see
What is the problem?
Choose one. We will help you step by step.
- No water Pump runs. No water comes out.
- Little water Flow or pressure is low.
- Will not start Pump is not running.
- Starts & stops Stops again and again.
- Error on screen A code or flashing light.
- Noise or heat Humming, shaking or very hot.
More problems
Smoke, burning smell or wet electrics?
Stop here. Do not touch the wet equipment, and do not start the pump again to look for the fault.
Start with the danger check02 / Your check
One question at a time.
Answer with what you can already see or hear. The check never asks you to start a faulty pump again, and every answer can be changed.
Any of these danger signs?
Smoke. Burning smell. Water inside electrical equipment. A damaged cable. Repeated breaker trips.
If there is a fire or someone is in danger, follow your site emergency procedure first.
Not sure about an answer? Say so. Every question has an option for that, and it leads to a safe next step.
03 / Before you write to us
Two photographs, and what you already know.
The check records what you answered. Only these two photographs have to come from you; everything else is optional.
- The whole screen, or the fault as you see it
- The pump, controller or inverter nameplate
- What the system runs on — solar panels only, a grid, a generator or a battery — if you know it
- The water level, if you can see it or already know it
A long description in English is not needed. Write in your own language, and keep the two photographs with it.
Next step
Send the check,
and the two photographs.
The check is carried into the message field when you open the Contact page. Add your own notes, in your own language, and attach the two photographs.